Ocbp-007a — Driver
sudo modprobe ocbp007a dmesg | grep OC‑BP‑007A You should see a line like:
# Configure channel 0 as output, channel 1 as input board.set_digital_mode(0, OCBP.MODE_OUTPUT) board.set_digital_mode(1, OCBP.MODE_INPUT)
All functions return an ocbp_status enum ( OCBP_OK , OCBP_ERR_TIMEOUT , etc.)—always check the return value in production code. | Symptom | Likely Cause | Fix | |---------|--------------|-----| | Device not found (Windows Device Manager shows “Unknown device”) | Driver not signed for your OS version (e.g., Windows 11 22H2) | Re‑install the latest driver from the official site; ensure you run the installer as Administrator. | | modprobe: FATAL: Module ocbp007a not found (Linux) | DKMS build failed | Check dkms status ; reinstall build dependencies ( linux-headers-$(uname -r) ). Look at /var/lib/dkms/ocbp007a/<version>/build/make.log for errors. | | ocbpctl: Permission denied (macOS) | The user lacks access to /dev/ocbp007a* | Add your user to the ocbp group (if created) or use sudo . | | Spurious digital glitches | Watchdog disabled or DMA buffer overflow | Enable the built‑in watchdog: ocbpctl --watchdog on . Also increase the DMA queue size with ocbpctl --dma-size 64 . | | Firmware mismatch (e.g., “expected v1.08, got v1.07”) | Board shipped with older firmware | Use the flashing utility: ocbp-fwupd -f firmware_v1.08.bin . The board will reboot automatically. | ocbp-007a driver
import time from pyocbp import OCBP
| Function | Description | |----------|-------------| | ocbp_open(int idx, ocbp_handle *h) | Open board idx (0‑based) | | ocbp_set_digital_mode(handle, ch, mode) | OCBP_MODE_INPUT / OCBP_MODE_OUTPUT | | ocbp_write_digital(handle, ch, value) | Write 0 or 1 | | ocbp_read_digital(handle, ch, *value) | Read state | | ocbp_read_analog(handle, ch, *volts) | 12‑bit ADC → voltage | | ocbp_close(handle) | Release resources | sudo modprobe ocbp007a dmesg | grep OC‑BP‑007A You
# Download the .pkg and install it (requires admin password) sudo installer -pkg OCBP007A.pkg -target / After installation, the driver registers a virtual serial device at /dev/ocbp007a0 . You can test with the bundled command‑line tool:
The driver includes a simple TCP server ( ocbp‑netd ) that can expose the board’s API on a LAN. It is intended for low‑traffic monitoring; for high‑speed deterministic control, keep the client on the same host. Look at /var/lib/dkms/ocbp007a/<version>/build/make
# Install prerequisites sudo apt-get install dkms build-essential linux-headers-$(uname -r)